Cart 0

2019 TEVO Black Widow 3D Printer + BL Touch Sensor DIY KIT

A$699.95 A$950.00
click depot
click depot

100% Original 2019 TEVO Black Widow 3D Printer + BL Touch Sensor DIY KIT 
2019 Black Widow 3D Printer info:  
Like it's little brother (The Tarantula) The Black Widow is based on the Prusa i3, a proven design with tens of thousands of users all around the world. Unlike it's little bro however the Black Widow is much larger with a MASSIVE print area and built with a much stronger frame to reduce flex when printing!  
You now have a unique opportunity to own your very own 2017 Black Widow 3D Printer.  
All parts of this printer are Open Source and are part of the RepRap project. In the event you may require parts these are all readily available. 
The Black Widow 3D Printer consists of all metal parts in its frame construction – extruded black anodised aluminium is used for the frame material with aluminium end plates for the assemblies and ball bearing V-groove wheels for silky smooth, quite operation. There are no smooth rod, linear bearing issues you find with other printers within this price range!  
The MASSIVE aluminium print bed plate is 370mm in size on the X-Axis and 250mm on the Y-Axis. The entire bed is heated by a 24-Volt power supply. This allows for much faster warm-up as well as a consistent temperature due to lower response times. 
The X-Axis travel is around 380mm (side to side) for the extruder carrier (some reduction due to hot-end physical size limitations). The X-Axis plate rides on silky smooth German-made ball bearings on the X-Axis track. The Y-Axis travel has 250mm of usable distance to work with. The Y-Axis bed support plate rides on silky smooth German-made ball bearings on the Y-Axis track. The Z-axis is limited by the physical dimensions of the frame – there is around 300mm of usable distance to work with on the Z-Axis. 
Distance may vary slightly depending on your assembly techniques. Both sides of the X-Axis track are lifted by a lead screw at each end. The lead screws are synchronised together using pulley gears on the screws and a pulley gear on the Z-Axis stepper motor above the frame. The Z-Axis stepper motor and the two lead screws are linked using an endless loop GT-2 belt which keeps the two lead screws turning at the same time. There are no 'lead screw' motor slippages as can be experienced by twin Z-Axis motor configurations as the belt does not allow the lead screws to get out of sync. 
The power supply is now installed inside a power unit enclosure along with the main board and LCD panel display for local control of the printer. Installation of the power supply removes the issue of possible electrical shocks due to exposed mains power connections. The power unit enclosure has a SD Card slot to allow printing locally without connecting to a computer. Simply load a G-code file on the SD Card then select the file using the LCD panel and print.
The Hot-End of the printer is a new design which makes changing the nozzle assembly a breeze. The entirely metal nozzle/heat break assembly is held in the hot-end assembly by a clamp screw. The heat radiator on the heat break tube is screwed onto the tube for much better thermal conduction. Removal and replacement of the nozzle/heat break is simple. Simply loosen the retaining clamp screw, unscrew and remove the radiator from the heat break tube then slide the nozzle assembly out of the bottom of the hot-end mount. To put it back together is just as simple. To align the nozzle simply place a piece of paper under the nozzle, loosen the clamp screw to allow the nozzle to contact the paper and then tighten the clamp screw. 
The filament feed motor assembly now uses a 5:1 reduction gear transmission to increase the torque force exerted on the filament during printing - no more “CLICK-CLICK-CLICK” of the feeder due to either partially blocked hot-end assembly or not enough force to feed the filament at the right flow-rate during printing. The entire hot-end/feeder assembly is made from metal so there is no concern for warpage due to high temperatures during long printing sessions.
The specially designed BL Touch Sensor uses proximity sensors on all three Axis of movement along with modified firmware. This reduces the possibility of sensor damage as there are no moving parts to snag or break during assembly or operation. Using proximity sensors allows for much finer control of the positional trip point detected with high accuracy and repeatability. 
This is a DIY KIT (Unassembled). All you need is included in the kit (even a complimentary 8GB SD memory card) so you can get started straight away! 
The buyer is wholly responsible for the assembly and as such Click Depot will not accept any returns for this kit once unpackaged and/or assembled.

Whilst the Black Widow is relatively simple to assemble and set-up it does take time and patience. It is also important that you have a basic understanding of mechanical assembly techniques and electrical wiring.

Under no circumstances should you handle wiring or the power supply when this machine is plugged in and/or turned on. One should maintain a healthy respect for electricity at all times.

 To avoid burns do not touch the heated print bed when operating and in particular the hot-end.

For younger users, (below 18yrs) we would strongly recommend an adult be present to supervise during assembly/set-up and also during operation.

The input mains adaptor on the power supply is selectable between 110V - 220V. 

 Black Widow 3D Printer Specs:
Name: 2017 Black Widow PrinterModel: Black Widow – Prusa i3
Positioning Accuracy: Z 0.004mm, X & Y 0.012mm
Minimum Layer Thickness: 50 MicronsLayer Resolution: 0.05mm
MAX Printing Speed: 100mm/sRecommended Printing Speed: 70mm/s
Build Size: 370x250x300mmPrinting Colour: Single Colour/Single Head
Filament Types: PLA, ABS, Nylon, PETG, Wood PVA and Flex
Extruder Type: Spider Teeth 5:1 Ratio Feed Extruder
Extruder Diameter: 0.4mm
Filament Diameter: 1.75mm
Recommended Extruder Temperature: 210°C (The maximum can be set to 260°C)
Heating Plate Temperature: 60-120°C (When in a 25°C environment with no drafts)
Best Ambient Temperature: ≥25°CPower Requirements: 220V, 500W, 50/60Hz, (110-V switchable) 24V Output
Control Electronics: MKS Gen V1.4
Connection: SD card on LCD Display or USB
File Print Format: STL, G-Code (SD-Card G-Code only)
Compatibility: Windows XP, Windows 7, Windows 10, Linux, Mac OSXCE, FCC
Specs: CE, FC, ROHS
Device Weight: 16kg
Equipment Size: 650x510x520mmPackage Size: 630x430x250mm
Shipping Weight: 18.5kg
Material Colours: White, Green, Red, Blue, Yellow, Black, Transparent, Orange, Grey and more 


Whilst the Black Widow is simple to set-up and use you should maintain a healthy respect for electricity at all times when operating this machine.

It is also important that you have a basic understanding of mechanical assembly techniques and electrical wiring. Under no circumstances should you open this machine if it is plugged in or turned on.

Avoid touching the heated print bed when operating and in particular the hot-end.

For younger users, (below 18yrs) we would strongly recommend an adult be present during assembly and also during operation.

Express Shipping is on us!!

Free Express Shipping?!?!
That's right!!! 
Provided there are no unforeseen delays your Black Widow printer should get to you within 1-3 business days from date of order!!
Please note: Shipping may take longer than that general 1-3 business days if you are located outside of a metropolitan area
Free Express Shipping is currently available to Australia only for this particular item.
Local Shipping Info:
For local stocks/shipments we generally ship with Australia Post, CouriersPlease, TNT, DHL, Toll and StarTrack. Shipping usually takes 1-3 business days.
We specifically choose the services of reputable couriers. This is so we minimise potential delays, losses and damages. These services also allow us to track items in real time.
These services naturally do come at a higher cost. This however is how we have chosen to best manage shipping from point A to point B. Your customer satisfaction is our first and foremost priority! 


To avoid any unnecessary delays please ensure your contact info (Address/Phone number) is accurate. A mobile number is recommended and is required in case the courier needs to contact you.

Once shipped a tracking number will be provided to you. You will then be able to check the status of your order in real time via the courier website using your unique tracking number. 


Please advise Click Depot as soon as you have taken delivery of your 3D printer. Our team will send you files, links and resources to assist you in getting set-up correctly and allow you the best possible start.


Our goal is to offer you the best available shipping options. Each day, we ship to customers Australia wide whilst ensuring that we always provide the highest level of service and care. Consistency in service is fundamental.

The time frame for delivery is divided into two parts:

  1. Processing time: Order and address verification. All orders are sent to our warehouse and usually dispatch within 24 hours after the order is placed (and payment has cleared).
  2. Shipping time: This refers to the time it takes for the item/s to be shipped from our warehouse to it's destination. Express usually only takes 1-3 business days door-to-door. Please note this is provided there are no unforeseen delays. If you are located outside of a metropolitan area shipping may take longer than the usual 1-3 business days.

Note: The above time frame is a guide only. In many cases goods are rarely delivered beyond this timeframe. For your peace of mind, we provide tracking information which will allow you to keep an eye on the progress of your parcel in real time.

We use the services of reputable shipping partners which include (but are not limited to) Australia Post, Toll, CouriersPlease, StarTrack, TNT and DHL. Shipping usually takes 1-3 business days.

We have specifically chosen the services of these trusted company’s to “avoid” any unnecessary delays and/or related issues (losses/damages etc).

These services also allow us to track items in real time. 

Naturally these services do come at a higher cost. This however is how we have chosen to best manage shipping from point A to point B. Your customer satisfaction is our first and foremost priority!

Important Notes:

- Shipping is presently available to Australia only.

- Free shipping is available on all orders with a value of $100 and above.

- Our free shipping services do not include remote (and outlying) locations in Australia. In the unlikely event that your location is classed as remote, Click Depot will contact you discuss your shipping options. Should the additional remote shipping fee not be accepted the order will be cancelled and promptly refunded.

- Click Depot Pty Ltd reserves the right to cancel and refund (in full) an order should we deem the address provided as "undeliverable".







We provide a 30 Day return policy on all our products. Please kindly read the terms and conditions below before you return an item:

The buyer is wholly responsible for the assembly and setup of a product and as such Click Depot may not accept any returns once an item is opened, unpackaged and/or assembled.

    1. The period of 30 days is calculated from the date the item is dispatched. 
    2. The item must be returned in original resalable condition with all original packaging. Item must be unopened.
    3. PLEASE DO NOT stick or write on the packaging. Please place postage stickers on “outer” packaging only.
    4. Return shipping costs are not included in the purchase price and will be on the senders account.
    5. Refunds will be processed only once item is received by our warehouse staff who have confirmed the item to be unopened, undamaged and in resalable condition.
    6. Click Depot reserves the right to provide a "partial refund" if terms and conditions have not been adhered to. The refund amount will be at Click Depot's discretion and will handled on a case by case basis.
    7. Click Depot reserves the the right to "deny a refund" if the Return Policy terms and conditions are not adhered to.

Should you wish to return an item, please email us at for further instructions.

Please ensure you use a trackable shipping service. We would strongly recommend purchasing shipping insurance for high value items. Without a trackable service, we cannot guarantee that we will receive your returned item and therefore cannot guarantee you will receive a refund.


Showroom by appointment:

BREED BUSINESS CENTRE - Nirimba Education Precinct

Suite 2.08, T2A, Warawara Circuit Quakers Hill, NSW 2763

Tel: (02) 8488 6213


Mon-Fri, 10am-4pm

More from this collection