FREE EXPRESS SHIPPING ON ORDERS AUSTRALIA WIDE OVER $50!!* PRICES ARE INCLUSIVE OF GST
Cart 0
[Best Place To Buy 3D Printers Online] - Click Depot

Wanhao D7 LCD Driver Board

This Wanhao D7 LCD Driver Board/Control Board is stocked as a replacement part for Wanhao D7 DLP Printer and is responsible for interfacing with the D7 Motherboard and creating filters within the UV printing process. Similar to a graphics card, this control board receives information from the motherboard which tells it what to display on the D7 LCD Display.
These displayed images then act as filters for UV light, allowing the light to reach some parts of the reservoir while filtering it from reaching other areas. Each image that it displays then acts as a filter for each layer during the print, and as the build platform is lifted from the reservoir, the resin is hardened layer by layer – eventually resulting in a clean, neat and accurate resin print.
 
TYPICAL APPLICATIONS FOR THE WANHAO D7 LCD DRIVER BOARD/CONTROL BOARD:
Despite being one of the most complex components on the entire machine, the Wanhao D7 LCD Driver Board/Control Board is surprisingly simple and easy to replace, as you essentially just need to take out the old one and install the new one in the same place with the same connections. As such, steps to replacing and installing a new board are as follows.
To start, you need to remove the outer casing that covers all of the bare electronics and make enough space for you to work without damaging nearby components. This entails the removing of cables and the LCD ribbon strip that connects into the board, as well as undoing the screws that hold it firmly in place. Remember where all of these cables are meant to go, as well as the orientation of the board, as installing the new board will present some difficulties if it is installed upside down or on its side.
The next step is to simply affix the new board in the same place, in the same orientation so that the cables will reach without hassle, and then tighten the screws to hold it in place. Then, insert the cables and ribbon strip back into the same sockets as they were on the previous board. Finally, put all of the covers of the machine back on to keep the inside sealed from UV light leaks.
This process should take no longer than 30 minutes to an hour and is made even simpler with a few easy-to-find instructional videos available online.
Note: Photos for demonstration purposes only.
 

Our goal is to offer you the best available shipping options. Each day, we ship to customers Australia wide whilst ensuring that we always provide the highest level of service and care. Consistency in service is fundamental.

The time frame for delivery is divided into two parts:

  1. Processing time: Order and address verification. All orders are sent to our warehouse and usually dispatch within 24 hours after the order is placed (and payment has cleared).
  2. Shipping time: This refers to the time it takes for the item/s to be shipped from our warehouse to it's destination. Express usually only takes 1-3 business days door-to-door. Please note this is provided there are no unforeseen delays. If you are located outside of a metropolitan area shipping may take longer than the usual 1-3 business days.

Note: The above time frame is a guide only. In many cases goods are rarely delivered beyond this timeframe. For your peace of mind, we provide tracking information which will allow you to keep an eye on the progress of your parcel in real time.

We use the services of reputable shipping partners which include (but are not limited to) Australia Post, Toll, CouriersPlease, StarTrack, TNT and DHL. Shipping usually takes 1-3 business days.

We have specifically chosen the services of these trusted company’s to “avoid” any unnecessary delays and/or related issues (losses/damages etc).

These services also allow us to track items in real time. 

Naturally these services do come at a higher cost. This however is how we have chosen to best manage shipping from point A to point B. Your customer satisfaction is our first and foremost priority!

Important Notes:

- Shipping is presently available to Australia only.

- Free shipping is available on all orders with a value of $50 and above.

- In the unlikely event Click Depot Pty Ltd reserves the right to cancel and refund (in full) an order should we deem the address provided as "undeliverable".

 

 

 

 

 

 

We provide a 30 Day return policy on all our products. Please kindly read the terms and conditions below before you return an item:

The buyer is wholly responsible for the assembly and setup of a product and as such Click Depot may not accept any returns once an item is opened, unpackaged and/or assembled.

    1. The period of 30 days is calculated from the date the item is dispatched. 
    2. The item must be returned in original resalable condition with all original packaging. Item must be unopened.
    3. PLEASE DO NOT stick or write on the packaging. Please place postage stickers on “outer” packaging only.
    4. Return shipping costs are not included in the purchase price and will be on the senders account.
    5. Refunds will be processed only once item is received by our warehouse staff who have confirmed the item to be unopened, undamaged and in resalable condition.
    6. Click Depot reserves the right to provide a "partial refund" if terms and conditions have not been adhered to. The refund amount will be at Click Depot's discretion and will handled on a case by case basis.
    7. Click Depot reserves the the right to "deny a refund" if the Return Policy terms and conditions are not adhered to.

Should you wish to return an item, please email us at sales@shopclickdepot.com.au for further instructions.

Please ensure you use a trackable shipping service. We would strongly recommend purchasing shipping insurance for high value items. Without a trackable service, we cannot guarantee that we will receive your returned item and therefore cannot guarantee you will receive a refund.

 

Showroom by appointment:

BREED BUSINESS CENTRE - Nirimba Education Precinct

Suite 2.08, T2A, Warawara Circuit Quakers Hill, NSW 2763

Tel: (02) 8488 6213

Email: sales@shopclickdepot.com.au

Mon-Fri, 10am-4pm


More from this collection