FREE EXPRESS SHIPPING ON ORDERS AUSTRALIA WIDE OVER $50!!* PRICES ARE INCLUSIVE OF GST
Cart 0
Wanhao D7 UV LED COB (Incl Heatsink and Pre-Soldered Wires)

Wanhao D7 UV LED COB (Incl Heatsink and Pre-Soldered Wires)

This UV LED unit is placed underneath the resin-box and shines UV light directly up through the LCD display and the D7 FEP Film, which solidifies the resin on top of the film. It sits directly atop a cooling fan and heat sink, and then plugs into the main Wanhao D7 LCD Controller Board. Fortunately, this part is relatively easy to install or replace with the help of online videos and requires very little electronics knowledge as well.
INSTRUCTIONS FOR REPLACING THE WANHAO D7 UV LED COB:
When replacing the Wanhao D7 UV LED COB in your printer, it’s important to remember to unplug the Wanhao D7 LCD Display ribbon cable before removing the case. This frees the cable from the case and helps to protect the cable from any potential damage. Once this is done and the cover is off, trace the power cables from the old LED COB to the power pins on the main controller board and then remove the corresponding connections – these should be the leftmost two points and should include one red and one black wire.
Once the wiring is disconnected, simply unscrew the old LED unit and carefully install the new LED unit in the same place – ensuring that the heat sink on the back of the LED unit is sitting atop the cooling fan. After fixing the unit in place, connect the new wires to the main controller board in the same orientation as the previous unit. Finally, put the cover back onto the machine and tighten all the screws so there is very little wobble, and remember to plug the LCD display ribbon cable back in.
 

Our goal is to offer you the best available shipping options. Each day, we ship to customers Australia wide whilst ensuring that we always provide the highest level of service and care. Consistency in service is fundamental.

The time frame for delivery is divided into two parts:

  1. Processing time: Order and address verification. All orders are sent to our warehouse and usually dispatch within 24 hours after the order is placed (and payment has cleared).
  2. Shipping time: This refers to the time it takes for the item/s to be shipped from our warehouse to it's destination. Express usually only takes 1-3 business days door-to-door. Please note this is provided there are no unforeseen delays. If you are located outside of a metropolitan area shipping may take longer than the usual 1-3 business days.

Note: The above time frame is a guide only. In many cases goods are rarely delivered beyond this timeframe. For your peace of mind, we provide tracking information which will allow you to keep an eye on the progress of your parcel in real time.

We use the services of reputable shipping partners which include (but are not limited to) Australia Post, Toll, CouriersPlease, StarTrack, TNT and DHL. Shipping usually takes 1-3 business days.

We have specifically chosen the services of these trusted company’s to “avoid” any unnecessary delays and/or related issues (losses/damages etc).

These services also allow us to track items in real time. 

Naturally these services do come at a higher cost. This however is how we have chosen to best manage shipping from point A to point B. Your customer satisfaction is our first and foremost priority!

Important Notes:

- Shipping is presently available to Australia only.

- Free shipping is available on all orders with a value of $50 and above.

- In the unlikely event Click Depot Pty Ltd reserves the right to cancel and refund (in full) an order should we deem the address provided as "undeliverable".

 

 

 

 

 

 

We provide a 30 Day return policy on all our products. Please kindly read the terms and conditions below before you return an item:

The buyer is wholly responsible for the assembly and setup of a product and as such Click Depot may not accept any returns once an item is opened, unpackaged and/or assembled.

    1. The period of 30 days is calculated from the date the item is dispatched. 
    2. The item must be returned in original resalable condition with all original packaging. Item must be unopened.
    3. PLEASE DO NOT stick or write on the packaging. Please place postage stickers on “outer” packaging only.
    4. Return shipping costs are not included in the purchase price and will be on the senders account.
    5. Refunds will be processed only once item is received by our warehouse staff who have confirmed the item to be unopened, undamaged and in resalable condition.
    6. Click Depot reserves the right to provide a "partial refund" if terms and conditions have not been adhered to. The refund amount will be at Click Depot's discretion and will handled on a case by case basis.
    7. Click Depot reserves the the right to "deny a refund" if the Return Policy terms and conditions are not adhered to.

Should you wish to return an item, please email us at sales@shopclickdepot.com.au for further instructions.

Please ensure you use a trackable shipping service. We would strongly recommend purchasing shipping insurance for high value items. Without a trackable service, we cannot guarantee that we will receive your returned item and therefore cannot guarantee you will receive a refund.

 

Showroom by appointment:

BREED BUSINESS CENTRE - Nirimba Education Precinct

Suite 2.08, T2A, Warawara Circuit Quakers Hill, NSW 2763

Tel: (02) 8488 6213

Email: sales@shopclickdepot.com.au

Mon-Fri, 10am-4pm


More from this collection